New i-Win Driver Changes Center of Gravity Location
Posted on April 4, 2014The new Integra i-Win let you adjust the vertical Center of Gravity through a moveable weight in the center of the head. Each head comes with a set of two exchangeable weight screws: 11-gram flat and wide metal screw and a 40 mm long brass screw weighing 9 gram.Inserting the short screw with heavy end will push the CG lower in the head & creates a lower-spinning driver. The lower CG position also lowers the launch angle by about 1º. Inserting the long brass screw will raise the head's CG and offers additional forgiveness for shots high on the face and creates a driver with intermediate spin. Shots hit higher on the face also loose less ball speed than when compared to shots high on the face with the heavy weight in the low position. Change Face Angle: Adjustable hosel design allows you to adjust the face angle from 2º open to neutral to 2º closed. Choose from three face angle positions so you can achieve the look you want at address and help you square the face to the ball at impact. Change Lie Angle: The adjustable hosel allows you to change the lie angle from 58º to 57º (i.e. 1º flat). Exchange Shaft: The hosel design also allows you to exchange the shaft and play the driver with another shaft. Cup face design enlarges the effective face area and sweet spot. The benefit is increased rebound effect for more distance.